83D PETG Filament — STRENGTH MEETS PRINTABILITY.

About This Material

Polyethylene Terephthalate Glycol-modified (PETG) gives you the best of both worlds — the ease of printing that's close to PLA, with the toughness and heat resistance that engineering applications demand. Our 83D PETG has been refined through thousands of hours of farm use to give you the most reliable experience possible.

All 83D PETG is run through our print farm before release. Every batch meets our internal quality standard — consistent diameter, reliable flow, accurate colour.

Print Specifications

Print Temp

230°C – 250°C

Bed Temp

70°C – 85°C

Diameter

1.75mm ± 0.02mm

Spool Weight

1kg net

Density

1.27 g/cm³

Tensile Strength

~50 MPa

Available Colours

BlackWhiteYellowBlue

Best Used For

▶ Functional mechanical parts

▶ Food-safe applications (natural colours)

▶ Enclosures and housings

▶ Outdoor parts with UV exposure

▶ Water-resistant components

▶ High-wear parts

Advantages

Excellent toughness and impact resistance
Good heat resistance up to ~80°C
Low shrinkage, minimal warping
Good layer adhesion
Slight flexibility reduces brittleness

Considerations

Slightly more stringing than PLA
Requires heated bed
Fewer colours than PLA

83D PETG

Advantages

Considerations

READY TO TRY 83D PETG?

EXPLORE OUR FULL RANGE

83D PLA

83D ABS

83D TPU